Hama 108341, Operating Instructions Manual

Page: 6 / 78

4
Note on Connecting Possible End Devices
• Please note that the maximum output current of 2.1 A is divided among
the ports. If you wish to connect multiple devices, please ensure that the
maximum current required by the devices does not exceed the maximum
output current of the product.
• Ensure that the device you intend to charge is compatible with the pin
assignment of the product. If necessary, contact the dealer who supplied
your end device or the support department of the device manufacturer.
• Observe the specified input voltage range of the product. The product
is not designed to be used with voltages that deviate from the specified
parameters.
Warning
If the product or the end device is visibly damaged, do not proceed with
charging.
4. Getting Started
Observe the information in the operating instructions of the device to be
charged. If no explicit instructions are provided, proceed as described below.
• Ensure that the charger, the connection cable and the end device are
compatible while they are not connected to the power supply.
• Plug the device to be charged into the charger. The device to be charged
should be switched off.
• Plug the charger into an appropriate electrical socket/cigarette lighter socket.
• The switched-off end device will now be charged.