4
5.2 Manually setting the date/time
•
Press and hold the
wave
button (5) for approx. 3
seconds to start manually setting the date/time
•
Set the following information in the order listed:
hour, minute, year, month, day
•
To select the individual values, press the
+
button
(2) or the
–
button (3) and confirm each selection
by pressing the
mode
button (4)
•
If you do not make an entry for 30 seconds, the
settings will automatically close.
Note – Input
Hold down the
+
button (2) or the
–
button
(3) to select the values faster.
5.3 Setting the time format and day of
the week
•
Press the
+
button (2) to switch between the 12
and 24-hour formats. In the 12-hour format,
AM
or
PM
appears before the time.
•
To set the language for the day of the week
display, press and hold the
–
button (3) for
approx. 3 seconds. Press and hold the
–
button
(3) until the language you want is shown.
Note – Day of the week
You can choose from German (
GE
), English
(
EN
), Italian (
IT
), Spanish (
SP
) and French
(
FR
) for the display of the day of the week.
5.4. Alarm settings and display
•
Press the
mode
button (4) repeatedly until
AL1
is displayed.
•
Hold the
mode
button (4) for approx. 3 seconds.
The hours display begins to flash.
•
Press the
+
button (2) or the
–
button (3) to
select the hour for the alarm time and confirm
your selection by pressing the
mode
button (4).
The minutes display begins to flash.
•
Repeat the process to set the minutes for the
alarm time. Once you have confirmed your
minutes selection with the
mode
button (4),
alarm 1 is activated and
appears.
•
You can also set a second alarm time.
Press the
mode
button (4) repeatedly until
AL2
is displayed and repeat the settings for
AL1
.
•
Press the
alarm on/off
button (6) to activate/
deactivate alarm time 1, alarm time 2 or both
at once. The alarm symbols
and/or
will
appear/not appear.
•
If the alarm is triggered, the corresponding
alarm symbol will begin to flash and an alarm
will sound.
•
Press the
alarm on/off
button (6) to stop the
alarm. Otherwise, it will stop automatically after
4 minutes.
•
If you press the
light / snooze
button (1) during
the alarm, the alarm is interrupted for 4 minutes
and then goes off again. The corresponding
alarm symbol and the snooze symbol
Z
Z
will flash.
5.5. Settings and display for a second
time zone
•
Press and hold the
+
button (2) for approx.
3 seconds to display the second time zone as
the main time. The
symbol appears next
to the time.
•
Press and hold the
wave
button (5) for approx.
3 seconds to set a second time in another time
zone. The hours display begins to flash.
•
Press the
+
button (2) or the
–
button (3) to
make the setting and confirm your selection by
pressing the
mode
button (4).
