2
Thank you for choosing a Hama product.
Take your time and read the following instructions and
information completely. Please keep these instructions
in a safe place for future reference. If you sell the
device, please pass these operating instructions on to
the new owner.
1. Explanation of warning symbols and notes
Risk of electric shock
This symbol indicates a risk of electric shock from
touching uninsulated product parts that may carry
hazardous voltage.
Warning
This symbol is used to indicate safety instructions or
to draw your attention to specific hazards and risks.
Note
This symbol is used to indicate additional
information or important notes.
2. Package contents
•
"Curved" mechanical timer for indoors
•
These operating instructions
3. Safety instructions
•
Never connect the timer to an extension cable or
adapter. Instead only connect it directly to the power
socket since otherwise overheating can occur.
•
Use the timer only in permanently installed wall
sockets.
•
The timer may only be operated in dry rooms.
•
Never use the timer outdoors.
•
Immediately disconnect the defective unit from the
mains and do not operate it any more.
•
Repairs may only be carried out by authorised
specialists.
•
The product is intended for private, non-commercial
use only.
•
Use the product only for the intended purpose.
•
Do not operate the product outside the power limits
given in the specifications.
•
The maximum connected load is 1800
Watt (resistive
load). In the event of an overload, there is a risk of
destroying the timer.
•
Protect the product from dirt, moisture and
overheating and use it in dry environments only.
•
Do not drop the product and do not expose it to
any major shocks.
•
As with all electrical products, this device should be
kept out of the reach of children.
•
Dispose of packaging material in accordance with
the locally applicable regulations.
•
Do not modify the product in any way. Doing so
voids the warranty.
•
Never connect multiple units of this product in
series.
•
Do not use any heat-generating devices (such as
electric blankets, coffee machines, etc.) with this
product. There is a risk of
fi
re and injury.
•
Do not use this product with any devices that are
motorised or any devices that have a rotating
component or tool. There is a risk of injury.
•
The product is intended only for use inside buildings.
•
Do not use the product in the immediate vicinity of
heaters, other heat sources or in direct sunlight.
•
Only use the article under moderate climatic
conditions.
•
Do not use the product in areas where the use of
electronic devices is not permitted.
•
Do not use the product in moist environments and
avoid splashes.
•
The product may only be operated with the type of
power supply network described on the name plate.
Risk of electric shock
•
Do not open the device or continue to operate it
if it becomes damaged.
•
Do not use the product if the
AC adapter, the adapter cable or the mains cable
are damaged.
•
Do not attempt to service or repair the product
yourself. Leave any and all service work to
quali
fi
ed experts.
4. Getting started
Warning
•
Only operate the product from an approved
socket that is connected to the public power
supply. The socket must be installed close to the
product and must be easily accessible.
•
Disconnect the product from the power supply
using the On/Off switch – if this is not available,
unplug the power cord from the socket.
•
If using a multi-socket power strip, make
sure that the total power consumption of all
connected devices does not exceed the socket
strip's maximum throughput rating.
•
If you will not be using the product for a
prolonged period, disconnect it from mains
power.
G
Operating instruction
