Hama 00176931, Operating Instructions Manual

Page: 7 / 149

6
Warning
• Buy special or suitable installation material from a specialised
dealer for wall-mounting.
• Ensure that no faulty or damaged parts are installed.
• Never apply force during installation. This could damage the
product.
• Before installation, ensure that the chosen wall is suitable for the
weight to be installation, and make sure that there are no electrical
wires, water, gas or other lines in the wall at the installation site.
• Do not mount the product above locations where persons might
linger.
• You can position the measuring station on a level outdoor surface
using the base.
• We recommend installing the measuring station securely on an
outdoor wall.
• Install an anchor, screw, nail, etc. in the wall of your choice.
• Hang the measuring station using the opening intended for this
purpose (4).
6. Operation
6.1. Connection to the measuring station
• To connect the base station and the measuring station, place the two
devices as close together as possible.
• After you insert the batteries, the base station automatically searches
for a connection to the measuring station and performs initial setup. If
the device does not connect automatically, the manual search program
on the base station must be started.