SAfETy INSTRuCTIoNS
4
3. Safety instructions
Risk of electric shock
•
Do not open the product and do not operate it if it is damaged, if smoke, a strange smell or loud
noises are coming from it. Immediately contact your dealer or our service department (see “Service
and Support”).
•
Do not use the product if the AC adapter, the adapter cable or the mains cable are damaged.
•
Do not attempt to service or repair the product yourself. Leave any and all service work to qualified
experts.
Warning
•
The device may only be operated on a 230 V 50 Hz AC voltage network. Work on the 230 V network
must only be carried out by an electrician certified in your country. The applicable accident prevention
regulations must be adhered to.
•
If you will not be using the product for a prolonged period, disconnect it from mains power.
•
Only operate the product from an approved socket that is connected to the public power supply. The
socket must be installed close to the product and must be easily accessible.
•
Disconnect the product from the power supply using the On/Off switch – if this is not available, unplug
the power cord from the socket.
•
If using a multi-socket power strip, make sure that the total power consumption of all connected
devices does not exceed the socket strip's maximum throughput rating.
•
Do not use the product in the packaging or in a rolled-up state.
•
Do not bend or crush the cable.
•
Take care not to kink the product. This can cause damage to the product.
•
Do not open the device or continue to operate it if it becomes damaged.
•
Route all cables so there is no risk of tripping.
•
Always pull directly on the plug when disconnecting the cable, never on the cable itself.
•
The product is intended for private, non-commercial use only.
•
Use the product only for the intended purpose.
•
Only use the article under moderate climatic conditions.
•
As with all electrical products, this device should be kept out of the reach of children.
•
Do not operate the product outside the power limits given in the specifications.
•
Do not use the product in areas in which electronic products are not permitted.
•
Do not drop the product and do not expose it to any major shocks.
•
Do not modify the product in any way. Doing so voids the warranty.
•
Dispose of packaging material immediately in accordance with the locally applicable regulations.
•
The product must only be operated on a supply network as described on the type plate.
•
Not suitable for operation with dimmers, electrical switches, photo cells, time switches or twilight
switches.