2
G
Operating instruction
1. Safety notes
Warning
• To avoid an electric shock from the device,
please disconnect the mains voltage (switch
off circuit breaker). Failure to observe the
installation instructions can cause fire or other
hazards.
• The installation may only be carried out in
standard flush-mounted boxes with a minimum
depth of 60 mm.
• Observe the permissible wires and wire
cross-sections when connecting to the device
terminals.
• Pay careful attention to the wiring diagram!
Note
• The switch is part of the building installation.
The relevant standards and guidelines of the
respective country are to be observed during
planning and installation. The device may only
be operated on a 230 V 50 Hz AC voltage
supply. Work with the 230 V mains supply may
only be carried out by electricians certified in
your country. The applicable accident prevention
regulations are to be observed.
• The product is intended for indoor use only.
• Do not attempt to service or repair the product
yourself. Leave any and all service work to
qualified experts.
• Do not continue to operate the product if it
becomes visibly damaged.
• Switch on and use only with the safety covers
closed.
• Metal covers must not be used.
• Not suitable for motor-driven appliances or
heaters.
2. It’s so simple:
• Download the
Hama Smart Solution
app from
the Apple App Store or on Google Play.
• Start the Hama Smart Solution app
• If you’re using it for the first time, you’ll have to
register and create a new account. If you already
have an account, log in using your login details
• After installation of the WiFi switch (by a qualified
electrician), the connected lamp flashes quickly
and you will hear the relay click. If it flashes
slowly or not at all, switch off and on again
three times in succession using the connected
light switch.
• Now click + in the upper-right corner of the app
and select Switch.
• Confirm that the device flashes quickly.
• Now enter the name of your WiFi network and
the password, and confirm.
Note: Power socket installation
• After the WiFi switch has been added in the app
as described above, it can be optionally installed
behind a power socket. The power socket can
then be conveniently switched on or off using
the app or your voice.
• Please note that when it is used behind a power
socket, the maximum current is reduced to 10 A
and power is reduced to a maximum of 2300 W.
• Once integrated, the app does not lose the WiFi
switch even in the case of a power interruption.
Note: Pairing restart
To start pairing mode again, the WiFi upgrade
switch first has to be connected to a switch (for
example, wall switch). Now turn the upgrade
switch ON and OFF three times quickly. It is then
back in pairing mode.
3. Warranty Disclaimer
Hama GmbH & Co KG assumes no liability and
provides no warranty for damage resulting from
improper installation/mounting, improper use of
the product or from failure to observe the operating
instructions and/or safety notes.
4. Recycling Information
Note on environmental protection:
After the implementation of the
European Directive 2012/19/EU and
2006/66/EU in the national legal
system, the following applies:
Electric and electronic devices as well
as batteries must not be disposed of
with household waste. Consumers are obliged by
law to return electrical and electronic devices as
well as batteries at the end of their service lives to
the public collecting points set up for this purpose
or point of sale. Details to this are defined by the
national law of the respective country. This symbol
on the product, the instruction manual or the
package indicates that a product is subject to these
regulations. By recycling, reusing the materials or
other forms of utilising old devices/Batteries, you
are making an important contribution to protecting
our environment.
Summary of Contents for 00176556
Page 2: ......
