8
Display
Searching for the DCF signal
/
Display flashing
Active
Displayed continuously
Inactive – no signal reception in the last 24
hours
Displayed continuously
Successful – signal is being received
Displayed continuously
Successful – strong signal
•
If the station still does not receive a signal, press and hold the –button (18) for approx.
3 seconds to start the manual search for the DCF signal. The wireless symbol (12) will start
to flash.
Note – Time settings
•
The search process takes about 3-10 minutes. If the search fails, it ends and is repeated
at the next clock hour.
•
In the meantime you can, however, set the time and the date manually.
•
The clock automatically continues to search for the DCF signal on a daily basis (00:00
a.m., 03:00 a.m., 06:00 a.m., 12:00 p.m.). If the signal is received successfully, the
manually-set time and date are overwritten.
•
Press and hold the – button (18) again for approx. 3 seconds to stop the manual search.
