4
Note – charging process
•
A complete charging cycle takes about 3–5 hours.
•
The product's battery can be charged both when it is
switched on and off.
•
If the battery capacity is less than 30%, a warning
sound is heard once. The status LEDs 2-6 on the
loudspeaker flash red once. This information is only
provided if the product is switched on.
•
The actual battery life will vary depending on how you
use the device, the settings and the environmental
conditions (batteries have a limited life).
Battery charge level indicator
•
While the power is on, briefly press [
POWER
] (1) to
display the current battery charge level.
•
Refer to the LED table for an explanation of the LED display.
•
The LEDs go out after 3 seconds.
5.3Switching on/off / standby
Note
•
Please be aware that Amazon Alexa only responds
when the device is on and when it is in standby mode.
Mains operation
•
Press [
POWER
] (1) to switch on the speaker.
•
After 10 minutes without playback, the speaker
automatically switches to standby mode.
•
Press and hold [
POWER
] (1) for about 3 seconds to
switch off the speaker.
Note
•
To switch off the speaker completely, disconnect it
from the power supply.
Battery operation
•
Press [
POWER
] (1) to switch on the speaker.
•
After 10 minutes without playback, the speaker
automatically switches to standby mode.
•
After 10 minutes in standby mode, the speaker
switches off.
•
Alternatively, press and hold [
POWER
] (1) for about
3 seconds to switch off the speaker.
5.4Volume adjustment
Press [
VOLUME -/+
] (5/6) to reduce/increase the volume.
6.Setting up the loudspeaker
Note
•
To be able to use all of the product's functions,
the Amazon Alexa app must also be downloaded
and an Amazon account set up. To do this, follow
the instructions in the Amazon Alexa app. More
information on this can be found at www.amazon.de.
6.1Downloading the Hama Smart Audio app
Note
The following operating systems are supported:
•
iOS 8 or higher
•
Android 4.4.2 or higher
•
Open the iTunes AppStore or Google Play Store on your
smartphone / tablet.
•
Use the search term "Hama Smart Audio".
•
Download the app as normal and install it on your
smartphone / tablet. To do this, follow the instructions on
your smartphone / tablet.
6.2Setting up the device for the first time with the
Hama Smart Audio app (ALEXA function)
WLAN note (wireless network)
•
Ensure the router is switched on, is functioning correctly
and that there is a connection to the internet/network.
•
Activate the WLAN function of your router if it is not
already activated.
•
Follow your router´s operating instructions as regards
the correct functioning of the WLAN connection.
•
Make sure the loudspeaker is in WLAN pairing mode.
The status LEDs 2–6 flash.
•
If setup mode is not active, briefly press the [SETUP]
button (13) on the back of the device to activate WPS
mode (flashes rapidly). Alternatively, press and hold the
[SETUP] button (13) for around 7 seconds to open an
AccessPoint (flashes slowly).
•
Make sure the Hama Smart Audio app is installed on
your smartphone / tablet and that all updates have been
installed.
•
Open the Hama Smart Audio app and touch
[CONFIGURE].
•
Then touch [Add More Speakers].
•
Open your smartphone's / tablet's WLAN settings by
touching [WLAN Einstellungen].
•
In your smartphone's WLAN settings, search for the
Hama SIRIUM1000ABT loudspeaker.
