5
5. Getting started
5.1 Battery operation
•
Open the battery compartment cover. It is located on the
rear of the radio.
•
Slide the battery compartment cover in the direction
indicated.
•
Insert the batteries paying attention to the match the
polarities correctly. The correct polarity is indicated by the
plus and minus symbols in the battery compartment.
•
Replace the battery compartment cover.
5.2 Mains operation
Connect the network cable to a properly installed and
easily accessible network socket.
The power supply unit is suitable for mains voltages
between 100 and 240 V, and is thus operable on almost
any AC power grid. Please note that a country-specific
adapter may be necessary.
You can find an appropriate selection of Hama products at
www.hama.com.
Note
•
Only connect the product to a socket that has been
approved for the device. The electrical socket must
always be easily accessible.
•
Disconnect the product from the power supply using
the on/off switch – if this is not available, unplug the
power cord from the socket.
•
When using a multi-socket power strip, make sure
that the sum power draw of all the connected devices
does not exceed its maximum throughput rating.
•
If you will not be using the product for a long period
of time, disconnect it from mains power.
5.3 General notes on use
Navigation and controls
[INFO]/[OK]/[VOLUME]/[TUNING]
(9) has two different
functions:
•
Turn
[INFO]/[OK]/[VOLUME]/[TUNING]
(9) to select
among menu items.
•
Confirm the selection by pressing
[INFO]/[OK]/[VOLUME]/
[TUNING]
(9).
Press [Menu] (5) to return to the previous menu level.
Volume adjustment
Turn
[INFO]/[OK]/[VOLUME]/[TUNING]
(9) to increase/
reduce the volume.
Additional Information
Press
[INFO]/[OK]/[VOLUME]/[TUNING] (9)
to display
context-dependent additional information. The information
shown depends on the operating mode as well as the
current selection of radio station.
•
Description
Indicates the radio station, the current program,
contents, subjects, etc.
•
Program genre/ country
Indicates the genre (music style) and the country or
region of the station.
•
Bit-Rate
he currently received digital bit rate of the received
station is displayed.
•
Signal strength
he signal strength of the received station is displayed via
a bar and its length.
•
Today´s date
•
Time
•
Service is not available
It´s displayed when there is currently no DAB reception.
Switching on/off
Press [Power] (8) to switch on the radio.
Press and hold [Power] (8) for approximately 3 seconds to
switch off the radio.
