1. Activate the connection button of the receiver. The status LED begins to
flash (Fig.5).
2. Hold the mouse with the bottom facing upwards approx. 30 cm away from the
receiver and press the connection button (Fig.5) using a pointed object (e.g. a
pen). The LED now illuminates constantly.
3. Move the mouse on the table. The cursor must move. The mouse is now
ready for use.
4. If the cursor does not move, repeat this step.
Note:
•
During normal operation, the mouse should be no more than 90 cm away from
the receiver to ensure a reliable connection.
•
When the mouse is activated, the status LED of the receiver illuminates or
flashes.
Battery control lamp
If the voltage level of the rechargeable batteries drops below the preset value
and you move the mouse or press its buttons, the rechargeable battery control
lamp flashes (Fig.4). Although the mouse will still function for some time, you
should charge the mouse in the battery charging station as soon as possible.
Switching the mouse off
To switch off the mouse completely (e. g. to conserve the rechargeable batteries
while you're on the go), proceed as follows:
10
Fig.5
Status LED
Receiver
Connect button
Mouse
Connect button
00052498bda 23.06.2006 12:07 Uhr Seite 10
