Hama 00050182 PREMIUM X12CD, Operating Instructions Manual

Page: 10 / 114

10 Premium X12CD
g
4.2.2 Shred paper and plastic cards in the paper feed
shaft
■ Insert the paper or the plastic card into the centre of the feed shaft
(2). The cutting rollers are switched on automatically.
■ Let go of the paper or plastic card. The device switches back to
standby mode after shredding is completed.
4.2.3 Shredding CDs, DVDs, and BluRay discs
■ Slide the operating switch (1) to the “Rev/On CD” position. The
cutting rollers begin turning continuously and the device is ready
for cutting CDs, DVDs, or BluRay discs.
■ Insert the CD, DVD or BluRay disc into the centre of the feed shaft
(3).
■ Let go of the CD, DVD or BluRay disc. After shredding is comple-
te, slide the operating switch (1) to the “OFF” position in order to
switch the device off, or slide it to “On/Auto” to switch to standby
mode for paper and plastic card shredding.
4.2.4 Reverse run mode
NOTE!
► These modes serve to remove any blockages in the cutter
system.
■ Slide the operating switch (1) to the “Rev/On CD” position. The
rollers of the paper cutting system rotate in the opposite direction.
■ Slide the operating switch (1) to the “On/Auto” position.
■ Switch approximately three times successively between the posi-
tions “Rev/On CD” and “On/Auto”.
■ Switch off the device and remove the jammed paper or plastic card
from the feed shaft (2).