5
g
Operating Instruction
PAPER BLOCKAGE AND OVERLOAD PROTECTION:
The CC 514L has a motor with an overload protection
function. The normal operating cycle for uninterrupted
shredding activity is three minutes continuous operation
followed by approx. twenty minutes switched off. The
shredder may switch itself off automatically in the
following cases:
1. If the shredder is used for more than three minutes at
a time.
2. If it becomes overloaded due to more than fi ve
sheets of paper being fed into the shredder at a time,
or if the paper is not fed into the shredder evenly.
3. For your own safety, if the paper basket is removed
while the shredder is running.
The fi rst two cases can trigger the automatic overload
protection function which interrupts the power supply.
If this is the case, proceed as follows:
1. Remove the plug from the socket and wait at least
twenty minutes until the overload protection function
resets. Remove all remaining paper from the shred
der or cut it off appropriately.
2. Then connect the machine to the mains again and
set the switch to
REV
. Using the reverse function, pull
the paper trapped in the cutting rollers out of the top
of the shredder. You can then set the switch back to
AUTO
.
3. If the switch is set to
„AUTO”
and the paper feeder is
clear, the shredder is now ready to use again.
SPECIFICATIONS:
- Slitting size: 4 x 35 mm (cross-cut)
- Slitting capacity: 5 sheets
- Slitting speed: 3 m/min.
- Max. feed width: 220 mm
- Mains supply: 220-240 V~
- Dimensions of the CC 514S: 340x445x120 mm
All manuals and user guides at all-guides.com
all-guides
.com