4
Note – Connecting terminal devices
• Before connecting a terminal device, check whether the
power output of the charger can supply sufficient power
for the device.
• Ensure that the total power consumption of all connected
terminal devices does not exceed 3000 mA.
• Please refer to the instructions in the operating manual of
your terminal device.
• Disconnect all cable and mains connections after use.
Note – Power Delivery/ QC 3.0, 2.0
• Plug & go: No manual setup necessary, just connect
and start:
Voltage and power are automatically configured by Power
Delivery/QC 3.0, 2.0.
• For efficient and optimised charging, the Power Delivery
(PD)/QC 3.0, 2.0 function must be supported by your
terminal device.
• With the large quantity of PD/QC-enabled terminal devices
with different firmware versions, it can happen that the
function is not fully supported.
6.6 Hands-free function
• Thanks to its built-in microphone, the FM transmitter features
an integrated hands-free function.
• When a call is received, the device automatically switches
from music playback to hand-free mode; simply press the
button to take the call.
• Press the
button again to end the call.
Pressing the
button twice, automatically calls the last
number dialled.
7. Care and Maintenance
Only clean this product with a slightly damp, lint-free cloth and
do not use aggressive cleaning agents.
Note
Disconnect the device from the power supply before cleaning
or if it will not be used for a long period of time.
8. Warranty Disclaimer
Hama GmbH & Co KG assumes no liability and provides no
warranty for damage resulting from improper installation/mount-
ing, improper use of the product or from failure to observe the
operating instructions and/or safety notes.
9. Technical Data
FM transmitter with
Bluetooth
®
function
Bluetooth
®
technology
Bluetooth
®
v4.2
Input voltage
12 – 16 V
Input current
2.1 A
Output voltage and current
on USB 1
(marked with symbol)
3.6 - 6.5V
3A
6.5 - 9V
2A
9 - 12V
1.5A
Output current, USB 2
(marked with
symbol)
No charging function;
suitable for USB sticks
only
10. Recycling Information
Note on environmental protection:
After the implementation of the European Directive
2012/19/EU and 2006/66/EU in the national legal
system, the following applies:
Electric and electronic devices as well as batteries must
not be disposed of with household waste. Consumers
are obliged by law to return electrical and electronic devices as well
as batteries at the end of their service lives to the public collecting
points set up for this purpose or point of sale. Details to this are
defined by the national law of the respective country.
This symbol on the product, the instruction manual or the package
indicates that a product is subject to these regulations.
By recycling, reusing the materials or other forms of utilising old
devices/Batteries, you are making an important contribution to
protecting our environment.
