
2 years warranty
1
2
Internet
connection via
Wi-Fi
2.4Ghz
Control your Air-Conditioner via
the Internet
Android, iOS, Voice control with
popular assistants
Setup Button
microUSB
power
Status
LED (green)
Disconnected
LED (blue)
Temperature
and
Humidity
sensor
1.
2.
3.
4.
5.
RemoteAC
TROUBLESHOOTING
The Status LED (green) is not
lit and the device is shown as
disconnected on the app
This means that the device is not
connected to the Cloud
Make sure that the device gets power
Check your
Internet connection
. If
you cannot access the Internet with a
different device on the same Wi-Fi
network check your router or with your
ISP
Check that the server is accessible at
https://hamsystems.eu
with your
browser. If it is not, check again in 5
minutes or refresh the app / webpage
Try restarting the device by
disconnecting and reconnecting
power
. Wait for a few minutes
Check if the device
is connected to
your Wi-Fi router / Access
Point
. If the device does not appear
to be connected, then repeat the setup
procedure and make sure that the Wi-
Fi name and password are correct. The
device may also need to be whitelisted
depending on your network
configuration. Note that the device and
the app use the ports 9001 and 9002
3
Temperature and
Humidity
real-time and
historical readings
Time schedules
The Air-Conditioner does not
respond to commands
Make sure that the device is powered
Make sure that your AC is in range of
the device's infrared signals
Make sure that the device is connected
to the cloud. The Status LED should be
fully on.
Make sure you have setup the correct
codeset from the device settings
Check that your air-conditioner has
power, by using the original remote
control.
5
1
4
This product is in compliance with the
Radio Equipment Directive (RED)
2014/53/EU
and the
Restriction of
Hazardous Substances (RoHS)
Directive 2011/65/EU
and carries the
CE Mark
. The complete EU declaration
of conformity can be found at
https://hamsystems.eu/res/doc/remote
ac_ce.pdf
76, 28th October, 54642, Thessaloniki, Greece
Manufacturer: Home Automation and More P.C.
More information about the installation
of our devices, their capabilities and the
use of our platform can be found at
https://hamsystems.tawk.help/
4