WI-25023
9
PAIN MANAGEMENT SYSTEMS
Generator Service Manual
decreased electromagnetic immunity of the PMG.
›
In Multi-RF Auto Temp mode, and in Multi-Cooled RF Auto Temp mode, maintain a
minimum distance of 10 mm between probe tips and ensure that the probe tips do not
touch.
›
When using the PMG with the pump unit accessory (TDA-PPU) refer to the pump IFU for
information on proper setup and operation.
4 Installation
Inspect the Generator for any signs of physical damage to the front panel, chassis or cover.
If any physical damage is found, DO NOT USE THE GENERATOR. CONTACT (Halyard Health)
Kimberly-Clark for a replacement. (Halyard Health, formerly Kimberly-Clark Health Care) must
approve all returns.
4.1 Preparing the Generator for Use
›
The Generator may be placed on a mounting cart or on any sturdy table or platform.
›
Provide at least 10-15 cm of space behind the rear panel of the Generator for forced air-
cooling. Do NOT obstruct the vents on the underneath of the Generator. Under continuous
use for extended periods of time, it is normal for the top and rear panel to be warm.
4.2 Mains Power Cord
›
The Generator is shipped with an approved hospital-grade mains power cord.
›
Do not use extension cords or three-prong to two-prong adapters. The mains power cord
assembly should be periodically checked for damaged insulation or connectors.
4.3 Generator Cleaning and Disinfection Instructions
›
Use a mild detergent and damp cloth to clean the Generator cover, front panel, and power
cable. The Generator cannot be sterilized. Do not allow fluids to enter the chassis.
›
The Generator may be disinfected using a standard hospital alcohol solution applied with a
cloth.
›
Do not spray or pour liquids directly on the Generator.
›
Non-flammable agents should be used for cleaning and disinfection wherever possible.
›
Flammable agents used for cleaning or disinfecting, or as solvents of adhesives, should be
allowed to evaporate before the application of high frequency surgery.
4.4 When you get a new Generator
When you open a box, you will find:
›
Generator
›
Power Cord
