8
9
A
B
To +12V
Battery Ground
Any Spare DPO from ECU (Motor A Control)
Any Spare DPO from ECU (Motor B Control)
To Battery Ground
To ECU
To ECU
To 5V
To Sensor Ground
To any spare AVI
To any spare AVI
ECU 5V
ECU Sensor Ground
Any spare AVI from ECU
Any spare AVI from ECU
TURBOSMART EWG WIRING GUIDE
Deutsch DT/DTM Connector Assembly
The DCMD includes spare connectors and pins,
giving you the ability to create your own
sub-harness for an E-Gate installation.
Male Plug (Utilises Female Pins)
1. Crimp pin to wire. 2. Insert pin/wire into harness side of plug.
3. Insert wedge to lock pins in connector.
Female Receptacle (Utilises Male Pins)
1. Crimp pin to wire. 2. Insert pin/wire into harness side of plug.
3. Insert wedge to lock pins in connector.
Male Plug
Female Plug
DT Connector Diagram (Wire Side)
4
3
1
2
1
2
4
3
Motor A to E-Gate
Motor B to E-Gate
ECU 5V
ECU Sensor Ground
Valve Position Sensor to ECU
Temperature Sensor to ECU
Along with the visuals provided
below, please visit our YouTube
channel for a thorough walkthrough
of building DTM connectors:
www.youtube.com/c/haltech
Connector A - DCMD Side
E-Gate Connections - ECU Side
Connector B - DCMD Side
E-Gate Connections - Gate Side
20A Sw12V IGN
To Motor A (E-Gate)
To Motor B (E-Gate)
To 5V
To Sensor Ground
To any spare AVI
To any spare AVI
