5
55
55
© Halstead Boilers Ltd 2008
4.0
4.0
4.0
4.0
4.0 What if
What if
What if
What if
What if
4.1
4.1
4.1
4.1
4.1
I suspect a gas leak
I suspect a gas leak
I suspect a gas leak
I suspect a gas leak
I suspect a gas leak
If you suspect a gas leak, turn off the gas supply at the gas
meter, and contact your installer or local gas supplier. If
you require further advice please contact your nearest Serv-
ice & Technical Helpline (0844 371 1111)
(0844 371 1111)
(0844 371 1111)
(0844 371 1111)
(0844 371 1111).
4.2
4.2
4.2
4.2
4.2
The fault light is on
The fault light is on
The fault light is on
The fault light is on
The fault light is on
If the Red LED light is illuminated, it indicates that the boiler
has failed to ignite or has detected a possible fault. When
this happens the boiler automatically shuts down and re-
quires to be reset manually (see 3.1).
4.3
4.3
4.3
4.3
4.3
The appliance is due its annual service
The appliance is due its annual service
The appliance is due its annual service
The appliance is due its annual service
The appliance is due its annual service
Please contact the Service & Technical Helpline (0844 371
(0844 371
(0844 371
(0844 371
(0844 371
1111)
1111)
1111)
1111)
1111) if you would prefer an authorised engineer or agent
to service your appliance. Alternatively your local CORGI
registered engineer may be able to service the appliance for
you. If you are a tenant your landlord will arrange for
servicing.
4.4
4.4
4.4
4.4
4.4
What if the display shows an unusual code
What if the display shows an unusual code
What if the display shows an unusual code
What if the display shows an unusual code
What if the display shows an unusual code
or number
or number
or number
or number
or number
The boiler may show an unusual code or character to signify
that a special function is in operation or that the boiler
requires attention (see 3.1). Whilst some functions are
automatically enabled/disabled, others require manual
intervention and you may therefore need to contact you
engineer or landlord.
4.5
4.5
4.5
4.5
4.5
I need to call an engineer
I need to call an engineer
I need to call an engineer
I need to call an engineer
I need to call an engineer
If you think your boiler may have developed a fault, please
contact your installer or the Service & Technical Helpline
(0844 371 1111)
(0844 371 1111)
(0844 371 1111)
(0844 371 1111)
(0844 371 1111). Have all your details to hand including
full address and postcode, relevant contact numbers and
your appliance logbook.
4.6
4.6
4.6
4.6
4.6
I wan
I wan
I wan
I wan
I wanttttt t
t
t
t
to e
o e
o e
o e
o ext
xt
xt
xt
xtend the war
end the war
end the war
end the war
end the warrrrrran
an
an
an
anty
ty
ty
ty
ty
You can if you wish, extend the warranty on your iHe
iHe
iHe
iHe
iHeaaaaattttt
boiler. Simply contact our Service & Technical Helpline (0844
(0844
(0844
(0844
(0844
371 1111)
371 1111)
371 1111)
371 1111)
371 1111) for further information.
----- The OFF mode will be displayed when the selector switch
is in the OFF position.
----- The frost protection mode becomes active automatically
if the temperature inside the boiler drops below an
acceptable level. This function will be enabled and disabled
automatically and no user intervention is necessary.
----- Your engineer uses the combustion analysis mode when
checking and/or adjusting your boiler. This function
requires to be enabled by the engineer.
----- The normal heating request or outlet temperature will be
displayed when you adjust the temperature selector or
when the boiler is in operation.
The purge cycle mode function is enabled if the electrical
supply to the boiler has been switched off or interrupted.
This mode will be active for 2-minutes once the electrical
power has been restored to the boiler.
Standby/OFF mode
Frost protection mode active
Combustion analysis mode active
Normal heating request (example 60
o
C).
Purge cycle mode
OR
The 2-digit display can show several different modes of
operation:
