97085C (Rev. SIB - 6/04)
4592FR_FTN 4593FR_ FTN
PAGE 4
TROUBLE SHOOTING AND MAINTENANCE
Orifice Assy:
Mineral deposits on orifice can cause water flow to spurt or not regulate. Mineral deposits may be removed from
the orifice with a small round file not over 1/8" diameter or small diameter wire.
CAUTION: DO NOT
file or cut orifice material.
Stream Regulator:
If orifice is clean, regulate flow as in
Stream Height"
instructions above. If replacement is necessary,
see freeze resistant box parts list for correct regulator part number.
Actuation of Quick Connect Water Fittings:
Cooler is provided with lead-free connectors which utilize an o-ring water seal.
To remove tubing from the fitting, relieve water pressure, push in on the gray collar while pulling on the tubing. (See Fig.2)
To insert tubing, push tube straight into fitting until it reaches a positive stop, approximately 3/4".
FOR PARTS, CONTACT YOUR LOCAL DISTRIBUTOR OR VISIT OUR WEBSITE WWW.HALSEYTAYLOR.COM
2222 CAMDEN COURT
OAK BROOK, IL 60523
630.574.3500
PRINTED IN U.S.A.
ITEMIZED PARTS LIST
ITEM
NO.
PART NO.
DESCRIPTION
1
2
3
4
5
6
7
8
9
10
11
12
13
100147140560
100322740560
101570540560
15013C
170705042830
400942308640
56092C
56121C
600985551640
66346C
70793C
75588C
75589C
Drain Gasket
Bubbler Gasket
Drain Gasket
Bubbler Tube Assy.
Basin
Bubbler
Poly Tubing (Cut To Length)
Drain Elbow
Drain Plug Assy.
Drain Tube
Elbow - 1/4"
Slip Joint Nut 1-1/4"
Gasket
FIG. 4
STREAM HEIGHT ADJUSTMENT:
Stream height is
factory set at 35 PSI. If supply pressure varies
greatly from this, adjust screw on regulator in
freeze resistant box. Clockwise adjustment will
raise stream and counter-clockwise adjustment
will lower stream. For best adjustment, stream
should hit basin approx. 6-1/2" from bubbler.
4592FR SHOWN
10
6
2
2
3
5
9
4
1
11
8
13
12
7
