HALOBOARD Halo Go, User Manual

Page: 7 / 24

Powering On the Halo Go
Power on your scooter by pressing the Power button. The Power button is located on the back
side of the scooter . The indicator lights will illuminate to indicate the power is ON.
Resetting and Calibrating the Halo Go
Put the scooter on a level surface where the wheels do not make contact with the ground.
Press the Power Button for 3-5 seconds until caution light flashes.
Turn OFF the scooter and turn ON again.
Powering On the Halo Go
04
1
1
3
2
2
Power Button
Caution Light