HALOBOARD Halo CEEWA, User Manual & Safety Manuallines

Page: 10 / 20

When you power on the Drone and the Remote Controller (RC), the Status Indicator LED on the RC will
turn GREEN if it is paired, or will remain RED if it needs to bind to the Drone.
Green LED = Paired to Halo Ceewa
Red LED = Not paired to Halo Ceewa
Blinking Red LED = Binding Mode active
Follow these procedures to pair the Halo Ceewa, Remote Controller, Sports Watch Remote, and Follow Module
together.
2. Remote Controller
In order to pair the Halo Ceewa with your Remote Controller (or Sports Watch Remote), you must activate ‘Binding
Mode’ on your Drone.
1. Halo Ceewa Binding Mode
Binding Procedure:
To pair the Remote Controller to the Drone, be sure the Drone is already in ‘Binding Mode’.
ACTIVATE BINDING MODE ON REMOTE CONTROLLER
1. Hold down the Return-to-Home button H and power on the RC (press power button twice and hold).
2. The Status LED on the Remote Controller will start to blink Red. Binding Mode is active.
3. Binding procedure will begin automatically. Once paired (5-10 seconds), Status LED on RC will turn green.
Binding and Connection Procedures
9
Halo Drone Pro users, you can only bind to either the Remote Controller OR the Sports Watch Remote at any given time. You
cannot be connected to both at the same time.
If Status LED on RC continues to blink red, pairing failed. Power down the RC and Drone and repeat
the Binding Procedure.
Flip the Halo Ceewa right-side-up again to disable ’Binding Mode’.
ACTIVATE BINDING MODE ON HALO CEEWA
1. Insert your High Performance Flight Battery into the Halo drone.
2. Flip the Drone onto its back (preferrably on your lap).
3. Power on the drone.
The Yellow indicator lights on its front should blink in intervals of 3. ‘Binding Mode’ is active.
0.5s
0.5s