Step 2: Charging your Personal Electronic Device
Important: Charge your HALO Pocket Power Starlight
2800 the initial time for a full 6 hours before regular
use. After the initial charge, normal charging will take
5-6 hours.
Charging your HALO Pocket Power Starlight 2800:
Using the supplied USB charging cable, plug the micro
USB tip into HALO Pocket Power Starlight 2800 input
port (shown above). Next plug the USB connector to a
computer or an AC power source with a USB 5V
output.
During charging of the HALO Pocket Power Starlight
2800 unit, the LED will illuminate Red. When the
charger reaches 100% fully charged, the LED will turn
off.
Important: Please check for voltage compatibility
with your device prior to using.
Using the supplied USB cable, plug the standard USB
connector end into the HALO Starlight charger output
port (as shown), insert the appropriate provided tip
into your electronic device (You may also use your
own USB cable that was supplied with your personal
electronic device.), slide the Power Switch down into
the ON position to begin charging. The LED will
display blue when charging your devices. The LED will
turn of automatically when charger is out of power.
TM