HALO POWER CUBE
Thank you for choosing HALO. The Power Cube is the best
of both worlds. It combines the on-the-go appeal of the
original HALO portable charger, with a versatile design that
can be recharged just about anywhere, and anytime.
Simply charge your power cube in a wall outlet or car
charging port, and it's ready to provide power on the go to
your small electronics.
Please read the operating instructions carefully before
using the HALO POWER CUBE.
TABLE OF CONTENTS
Included Items
Operating Instructions
Maintenance and Care
Safety Precautions
Specifications
Warranty and Contact Information
INCLUDED ITEMS
- HALO POWER CUBE
- Standard USB to Micro USB Cable
- Operating Instructions
LOCATION OF CONTROLS
1
| Power ON/OFF Button
2
| LED Battery Indicator
3
| USB Output Port
4
| Car Plug
5
| Wall Plug
1 | POWER YOUR LIFE
4
2
3
5
1
OPERATING INSTRUCTIONS
Prior to first use, it is recommended to fully charge the
HALO POWER CUBE.
Press the Power Button to display the power level on the
HALO POWER CUBE. The LED Battery Indicator will display
the green light when fully charged. This will take up to six
hours and will vary depending on whether the unit is
charged from a wall outlet or car.
TO TURN ON/OFF THE HALO POWER
CUBE
The HALO charger will automatically turn on and begin
charging as soon as it is plugged into your personal
electronic device. To preserve the battery, the HALO
charger will automatically turn off after approximately one
minute if your personal electronic device is fully charged
and no longer drawing power. The unit may also be turned
on/off by manually pressing and holding the power button
for three seconds.
POWER INDICATOR/BATTERY STATUS
When charging/discharging, the LED will flash one of the
following colors indicating the amount of battery level
remaining: red (1%–33%), orange (34%–66%) or green
(67%–100%). The power status can also be checked by
pressing and releasing the power button when the unit is
not in use. When the HALO charger is 100% charged, the
green LED will stop blinking and turn solid green.
CHARGING THE HALO POWER CUBE
Charge your HALO POWER CUBE using the built-in wall or
car plug. If charging indoors, plug the wall adapter into a
wall outlet. If charging on the go, plug the car plug into the
car lighter outlet. Depending on how much charge your
HALO POWER CUBE already has, the charging indicator
light will flash green, orange, or red, indicating your HALO
charger is properly charging.
CHARGING YOUR PERSONAL
ELECTRONIC DEVICE
Charge your personal electronic device using the supplied
Standard USB to Micro USB Cable. Plug the USB connector
into your HALO charger. Insert the tip into your personal
electronic device and charging will begin automatically.
You may also use your own USB cable that was supplied
with your personal electronic device. While your personal
electronic device is charging, the LEDs will continue to
illuminate, indicating the HALO charger’s remaining
capacity. The red LED lights will begin to flash prior to the
HALO charger running out of power.
Note: To charge both the HALO POWER CUBE and your
personal electronic device, first plug the HALO POWER
CUBE into either a wall outlet or car outlet. Using the
supplied Standard USB to Micro USB Cable, connect your
personal electronic device to the HALO POWER CUBE and
your personal electronic device will automatically begin to
charge. Once your personal electronic device is fully
charged, the HALO POWER CUBE will then begin to charge
itself.
STORING/HANDLING/CLEANING THE
HALO POWER CUBE
- Do not get wet or store in extreme temperature condi-
tions.
- Do not disassemble the HALO charger or attempt to
repair it.
- Use a soft cloth with soap to clean the exterior of your
HALO POWER CUBE. Do not use liquid detergent or
chemicals of any kind.
MAINTENANCE AND CARE
After prolonged use, the internal battery will become weak
and the operation may become intermittent. When the
battery is very low, it will rapidly flash to alert you to
recharge the internal battery as soon as possible.
To maximize battery life: once the battery is fully
discharged, immediately recharge (regardless of whether
you plan to use this unit or not). If you do not plan to use
the battery for an extended period of time (one week or
longer), we recommend that you fully charge the battery.
For longer periods of storage, please recharge the battery
at least every two months to maintain the battery in
optimum condition.
SAFETY PRECAUTIONS
This HALO POWER CUBE has been designed and
manufactured to ensure your personal safety when used in
the directed manner. Improper use can result in potential
hazard.
Please read all safety and operating instructions carefully
before installation and use. Keep these instructions handy
for future reference.
- The HALO POWER CUBE should not be used near water or
wet areas such as bathtubs, showers, bathrooms, sinks, or
swimming pools.
- To clean, use damp cloth to gently wipe the surface of
only the patch area of the HALO POWER CUBE.
- To reduce the risk of fire or electric shock, do not expose
the HALO POWER CUBE to rain or moisture. Keep the HALO
POWER CUBE away from dripping, splashing, or any objects
filled with liquids. Do not place anything on HALO POWER
CUBE.
- Keep away from heat sources, including but not limited
to: open flame sources, radiators, stoves, ovens, cars, and
amplifiers that produce heat.
- Do not puncture, crush or subject to mechanical shock.
- Do not disassemble .
- Unplug the charger when batteries are fully charged or
not in use.
- Li-ion batteries must be recycled. Do not dispose of in the
trash
SPECIFICATIONS
Battery Capacity:
3000mAh
USB Output:
5V 2.1A
Rated AC Input:
110V~240V, 15W
Rated DC Input:
12V~24V, 1.5A Maximum
Dimensions (W x H x D):
70 mm x 70 mm x 39 mm
Weight:
157
g
Working Temperature:
0ºC to 45ºC
Working Humidity:
Max 85%
COMPLIANCE WITH FCC REGULATIONS
“This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions: (1)
this device may not cause
harmful interference, and (2) this device must accept any
interference received, including interference that may
cause undesired operation.”
“Warning: Changes or modifications to this unit not
expressly approved by the party responsible for
compliance could void the user’s authority to operate the
equipment.”
“NOTE: This equipment has been tested and found to
comply with the limits for a Class B digital device, pursuant
to Part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference
in a residential installation. This equipment generates, uses
and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause
harmful interference to radio communications.
However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does
cause harmful interference to radio or television reception,
which can be determined by turning the equipment off
and on, the user is encouraged to try to
correct the interference by one or more of the following
measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and
receiver.
- Connect the equipment into an outlet on a circuit
different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician
for help.
LIMITED WARRANTY
Halo International SEZC LTD warrants its products to be
free fromdefects in material and workmanship under
normal use. Conditionsare as follows:
- During the first 90 days from date of purchase, Halo
International SEZC LTD will repair or replace the defective
product.
- Halo International SEZC LTD will, subject to inspection,
repair the defective product or replace it with a new or
reconditioned unit. The return must be accompanied by a
Return Merchandise Authorization (RMA) number to be
issued upon request, and must be shipped prepaid. We do
not offer shipping rebates at this time.
- Warranty is void if the product has been improperly
handled or misused in any way, or if the label and/or
bar-coded warranty label has been removed or tampered
with.
- Where applicable, all requests for warranty returns must
be accompanied by a proof of purchase.
- The warranty does not extend to the electronic
equipment that is used or which incorporates with any of
our products and accessories.
Halo International SEZC LTD shall not be held responsible
for the improper use of its products.
- For all questions or exchange requests, please call
888-907-6274, or email us at [email protected]
This Limited Warranty sets forth the full scope of HALO’s
obligations and liabilities with respect to the product. All
implied warranties, including, without limitation, implied
warranties of merchantability and fitness for a particular
purpose, are limited to the duration of this Limited
Warranty. In no event shall HALO be liable for any
incidental, special, consequential or punitive damages or
any damages or losses of or to electronic equipment or
products that are used with any of HALO’s products.
