IMPORTANT: For spring and slat cribs and beds, cord should be threaded through the SnoozyPod and should exit in the
middle of the mattress support. Do not allow cord to exit at the side of the bed, where it could be reached by a child.
TO PAIR YOUR SNOOZYPOD WITH BLUETOOTH:
The SnoozyPod app can be downloaded onto your smartphone for free from the Apple App Store or from Google Play.
The SnoozyPod app is compatible with both Apple and Android smartphones.
Note:
the SnoozyPod app is not available on tablets.
1. Make sure you have Bluetooth® enabled on your smartphone.
Tip:
The Bluetooth feature is usually found in the Settings menu.
2. Go to the Apple App Store or Google Play and search for “SnoozyPod”. Download the free app.
3. Follow the instructions in the app to operate the unit and set parental lock function if desired. For best Bluetooth® performance,
use your mobile device within 33 ft. (10 m) of the SnoozyPod. Keep other wireless equipment at least 3 ft. (1 m) away from
SnoozyPod.
TO OPERATE SNOOZYPOD FROM THE CONTROL PANEL:
The SnoozyPod will automatically power on when plugged in. If you need to power on or off, press and hold the On/Off button.
Soothing Sounds:
There are four soothing sounds (heartbeat, white noise, soothing stream, and rainforest.
There are two volume settings: low and high. There are two duration settings: 30 minutes and
continuous. To activate soothing sounds, press the Soothing Sounds button to activate the heartbeat
sound. Press again for white noise. Press a third time for soothing stream. Press a fourth time for
rainforest. Press a fifth time to turn off all sounds.
To adjust duration of soothing sounds:
press Continuous Sound button. The star above the
Continuous Sound button will glow green. Sound will play until you turn it off. All other soothing
functions will power off after 30 minutes.
Note:
when operating on battery power only, the Continuous Sound function is disabled.
Sounds will automatically power off after 30 minutes. You may extend sounds for an
additional 30 minutes by pressing the Continuous Sound button once.
To adjust volume of soothing sounds:
Press volume button once for low volume.
Press again for high volume. Press a third time to turn off sounds.
To activate vibration:
Press Vibration button once to activate gentle vibration. Press again
for stronger vibration. Press a third time to turn off vibration. Vibration will automatically power
off after 30 minutes.
Note:
vibration can be set to run continuously from the app. Please see
TO OPERATE SNOOZYPOD FROM THE APP.
To activate nightlight:
Press the Night Light button to turn on a soft, amber glow,
LED Night Light. Press a second time for brighter light. The Night Light will automatically
power off after 30 minutes.
Notes for General Use:
The SnoozyPod will automatically go into power save mode after 30 minutes. To reawaken SnoozyPod from power save mode,
press and hold the On/Off button. If you want sounds to play all night long, press the Continuous Sound button. If Continuous
Sound is activated, sound will play until you turn it off.
After 30 seconds without a press, the display button lights will turn off. Press any button to reawaken SnoozyPod. Then press
desired button to activate that function.
The unit can still be operated via Bluetooth when in power saving mode.
High
Low
High
Low
High
Off
Low
High
Low
Off
Rainforest
Heartbeat
White Noise
Soothing
Stream
High
Low
High
Low
High
Off
Low
High
Low
Off
Rainforest
Heartbeat
White Noise
Soothing
Stream
TO OPERATE SNOOZYPOD FROM THE APP:
1. Open app. Your SnoozyPod should be listed
beneath the Search bar. Select your SnoozyPod
to activate.
2. When prompted, press “Pair”
3. If an update is available, a notification will pop
up describing the update. Press OK.
4. A blue dot will appear over the lower left corner
of the gear icon if an update is available. Select
the gear icon to download the update.
5. Press to update firmware. Follow prompts
to start update. This will send an update to the
SnoozyPod. The green star icon on the control
panel may flash while the update is loading.
6.
To activate soothing sounds:
press the
Soothing Sounds button to activate the heartbeat
sound. Press again for white noise. Press a third
time for soothing stream. Press a fourth time for
rainforest. Press a fifth time to turn off all sounds.
To adjust the volume of soothing sounds
: press
the volume button once for low volume. Press
again for high volume. Press a third time to turn
off sounds.
To adjust duration of soothing sounds:
press the
toggle switch to choose 30-minute or continu-
ous sounds. In the continuous setting, soothing
sounds will play until you turn them off.
To activate vibration:
press Vibration button once
to activate gentle vibration. Press again for
stronger vibration. Press a third time to turn off
vibration. Vibration will automatically power off
after 30 minutes.
To adjust duration of vibration:
press the toggle
switch to choose 30 minute or continuous vibra-
tion. In the continuous setting, vibration will run
until you turn it off.
To activate nightlight:
Press the Night Light
button to turn on a soft, amber glow, LED Night
Light. Press a second time for brighter light. The
Night Light will automatically power off after 30
minutes.
1.
3.
5.
2.
4.
6.
22978 SnoozyPod Instructions_US.indd 2
11/21/17 3:35 PM
