Problems or Damaged Package?
Contact us at www.haloquality.com/contact
TOUCHLESS TRASH CAN
®
SC13P
HOT TO USE THE ACTIVATED CARBON DEODORIZER
The new Touchless Trash Can is equipped with a Deodorizer
Compartment that houses the odor-neutralizing Activated Carbon
Deodorizer. One (1) replaceable Activated Carbon Deodorizer is pre-
installed inside the Deodorizer Compartment. Please follow these
instructions to maximize the Activated Carbon Deodorizer’s effectiveness.
1.
Turn power switch to “Off” mode. Remove and turn Lid Cover upside
down.
2.
Slide Deodorizer Compartment (Fig.1) to the right (Fig.2) to remove.
3.
Remove Activated Carbon Deodorizer from the Compartment.
4.
Remove new Activated Carbon Deodorizer pouch from plastic bag (Do
NOT cut open the Deodorizer pouch).
5.
Insert new Deodorizer pouch (Fig.3) into the Compartment.
6.
Return the Deodorizer Compartment to Lid Cover (Fig.1) and slide to
the left (Fig.2) to lock the Deodorizer Compartment in position.
7.
Replace Activated Carbon Deodorizer every 3 months or when odor
becomes too strong.
8.
Order replacement Activated Carbon Deodorizer online at
www.haloquality.com.
Cleaning Tips
:
Deodorizer Compartment can be washed with soap and warm water
(not intended for dishwasher cleaning)
Used Deodorizer pouch should be disposed of in a trash can
GENERAL TROUBLESHOOTING STEPS
(1)
Turn power switch to “Off”, remove battery or AC power adapter, then rub and wipe clean the
sensor area with a soft damp cloth and dry it immediately with a soft dry cloth. Re-insert batteries
or plug in AC adapter (DO NOT USE battery and AC adapter at the same time).
(2)
Place trash can in an open area where nothing is blocking or within 10 inches of the sensor eye.
Make sure no sunlight or direct light shines on the sensor. Turn on the power and try opening lid
again.
(3)
If trash can is still not working correctly, remove the batteries or AC adaptor. Let trash can sit for at
least 2 hours to reset. Try opening lid after reset.
If your halo
™
product is still not working after trying these troubleshooting steps, please
contact us at www.haloquality.com/contact for assistance.
