Halo Elite3B HZ-1002-XNA, Essentials Manual

Page: 18 / 88

18
Lighting instructions located here
Burner Viewing Ports
1. Open lid during lighting.
2. Push and turn control knob to . Press the
electronic igniter and hold for 3-5 seconds
then turn to light front section of burner.
LIGHTING THE GRIDDLE
LIGHTING INSTRUCTIONS
NOTE: To confirm the burner is lit, look through the burner
viewing port above the control knob, then turn the control knob to
light the back section.
3. If ignition does not occur in 5 seconds,
turn the burner control off, wait 5
minutes, and repeat the lighting
procedure.
SYMBOLS
Represents Burner being lit
Represents Burner already lit
Represents Front Zone on
HIGH setting
Represents Dual Zones on
HIGH setting
NOTE: Lighting instructions are located under the bottom of the
control panel. Rotate out to follow the instructions.
Represents Unit is in "OFF" position
FRONT
ZONE
DUAL
ZONES