Halo BOLT 57720, Operating Instructions Manual

Page: 9 / 18

WWW.BESTHALO.COM | 6
Condition Potential Cause Solution
JUMP START TROUBLESHOOTING TIPS
HALO BOLT shuts
off unexpectedly
HALO BOLT Jump
Start and On/Off
button flashes red
and blue
HALO BOLT
battery indicators
flash green
HALO BOLT
flashes red
HALO BOLT Jump
Start button flashes
green continuously
The HALO BOLT is not
sufficiently charged to jump
start the vehicle.
The HALO BOLT detects
that it is connected to a
vehicle battery that does not
require a jump start. This
could indicate that the
vehicle battery or other
component is faulty.
This could occur when
attempting to jump start a
vehicle while other electrical
components (i.e. headlights,
heater, radio, etc.) are on.
The vehicle battery may be
faulty.
The HALO BOLT has
detected a high temperature
condition.
The jumper cables have not
been properly connected to
the vehicle battery.
The HALO Bolt is waiting to
be connected to a battery.
Recharge the HALO BOLT.
It is recommended that
you consult with a certified
mechanic.
Turn off your headlights
and any other components
that may drain your car
battery and try the jump
start process again.
It is recommended that
you consult with a
certified mechanic.
Disconnect the HALO
BOLT and allow it to cool
for several minutes. Then
try the jumpstart process
again.
Check the jumper cables
and ensure that the red
clamp is connected to the
positive terminal (+) and
the black clamp is
connected to the negative
terminal (-)
Check the jumper cables
and ensure they are
properly connected to the
battery.
NOTE:
If none of these troubleshooting tips work, please consult a
certified mechanic for assistance.