Halo Bolt 55500, Operating Instructions Manual

Page: 7 / 15

5
Turning your HALO Bolt 55500 ON/OFF
To turn on, press and release the Main Power Button 3 ,
the power level indicator on the front of your HALO Bolt will
illuminate. To turn off your HALO Bolt press and release the
Main Power Button 3 .
Charging your HALO Bolt 55500
To recharge your HALO Bolt, using the provided AC wall
adapter cable, plug the AC adapter tip into the charger’s
charge input DC 20V/0.6A port (see illustration below).
Next, connect the AC adapter into a wall outlet. Your HALO
Bolt will automatically begin charging. Charge your HALO
Bolt for a full eight hours. When your HALO Bolt is fully
charged, all four indicator lights will be solid blue.
Jump Starting Your Vehicle with the HALO Bolt 55500
Warning: Do not touch red (positive) and black
(negative) clamps together at any point.
1. Plug the jumper cables into the jump start output on your
HALO Bolt.
Warning: Make sure the jumper cables are fully plugged
into the jump start output before trying to jump your
vehicle.
Safety Precautions
- Your HALO Bolt has been designed and manufactured to
ensure personal safety. Please read the following carefully
before using. Incorrect operation or incompatibility with
your personal electronic device may result in reduced
battery performance or damage.
- Carefully read the operating instructions, and use your
HALO Bolt correctly.
- Make sure the jumper cables are fully plugged into the
jump start output before trying to jump your vehicle.
- Do not attempt to jump start your vehicle after three
unsuccessful tries, otherwise you may damage the HALO
Bolt.
- Caution: The lithium-ion rechargeable battery used in
this charging device may present a risk of fire or chemical
burn if mistreated. Do not disassemble, expose to heat
above 212°F (100°C) or incinerate.
- Misusing or incorrectly connecting your HALO Bolt may
2. Attach the red clamp (positive) of the jumper cables to
the positive terminal on your vehicle’s battery.
3. Attach the black clamp (negative) of the jumper cables
to an unpainted chassis/vehicle body part or solid
non-moving metal vehicle component.
Note: You may also use the negative terminal on your
vehicle’s battery.
4. Press and hold the 1 Button on the jumper cable box
until the blue light labeled “POWER” turns on.
5. Press and hold the 2 Button on the jumper cable box
until the red light labeled “CHARGING” turns on. At this
time, your jumper cables will begin to beep.
6. Press and release the Main Power Button 3 on your
HALO Bolt.
Note: You have 25 seconds to start your vehicle.
7. Start your vehicle (if your vehicle does not start on first
attempt, please unplug the jumper cables from the battery
terminal and your HALO Bolt and repeat the process from
Step 1).
cause electric shock to users and damage equipment.
- Your HALO Bolt may become warm under extended
high power operation. During operation, keep your HALO
Bolt away from materials that may be affected by these
temperatures.
- When used correctly, lithium-ion rechargeable batteries
provide a safe and dependable source of portable power.
However, if they are misused or abused, this may result
in leakage, burns, fire or explosion, causing personal
injury or damage to other devices.
- Do not disassemble your HALO Bolt. There are no
user-serviceable parts inside. Incorrect reassembly
may result in shock or fire hazard.
- Do not drop or subject to strong impacts. Do not oper-
ate your HALO Bolt if it has received a sharp blow, or has
otherwise been damaged in any way.
- Do not expose your HALO Bolt to moisture, water, rain,
or snow.
- Do not insert any object into the ports or openings of
your HALO Bolt.
- Never leave your HALO Bolt unattended while charging.
- There is a risk of the batteries exploding, overheating,
or igniting. Do not disassemble, modify, heat or short-
circuit the batteries. Do not place in fire or leave in hot
places. Do not expose to direct sunlight.
- Only charge your HALO Bolt by the specified method
with the specified cable.
- In the unlikely event of leakage or explosion use sand or
a chemical fire extinguisher.
- Batteries should be recycled or disposed of as per state
and local guidelines.
R
Specifications
Battery Cell: Li-Polymer Battery
Capacity: 55500 mWh
Input: DC 20V/0.6A
Output: DC 12V (Car)
DC 19V/3A
USB 5V/2.1A
Dimensions: 6.4”x 3.4”x 1.5” (163 x 87 x 37.3mm)
8. Once your vehicle has successfully started, remove the
black clamp (negative) unpainted chassis/vehicle body
part or solid non-moving metal vehicle component.
9. Remove the red clamp (positive) from the positive termi-
nal on your vehicle’s battery.
Note: Remove the HALO Bolt jumper cables from your
vehicle’s battery terminals within one minute after your
vehicle starts.
10. Unplug the jumper cables from the jump start output
on the HALO Bolt.
11. Leave your vehicle engine running.
Warning:
-Do not touch red (positive) and black (negative)
clamps together at any point.
- Do not attempt to jump start your vehicle after three
unsuccessful tries, otherwise you may damage the
HALO Bolt.
Charging An Electronic Device Using 5V/2A USB
Output Port
For personal electronic devices with a Micro USB port,
plug the Micro USB tip into your electronic device. Next,
plug the Standard USB end of the cable into your HALO
Bolt’s 5V/2A USB Output port ( ). Press and release the
Main Power Button 3 on your HALO Bolt to begin charg-
ing. Your HALO Bolt is also compatible with the charging
cable provided with your personal electronic device. To
use, plug the Standard USB end of the cable into the
HALO Bolt’s 5V/2A USB Output port (see illustration
below).
Intelligent Recognition
Your HALO Bolt is programmed with an intelligent recogni-
tion system to achieve higher compatibility for charging
different mobile phones. If it does not charge when con-
nected to your mobile phone, please restart your HALO
Bolt.
Compatible with:
Mobile phones, Tablets, PSP, NDS, MP3, MP4, MP5,
Bluetooth, GPS, Cameras and more.