Check
To See if You're Paired
Once your board and remote are powered on, check to see if you are paired (the remote will state "Disconnect" if you are not paired). If you
are not paired, follow these steps to pair your remote to your board. Start by powering on the Halo Board Beast and your Halo Remote.
1) Ensure everything is powered on.
2) Press and hold the power button for
5 seconds.
3) The Power Indicator LED on the
board will begin to flash slowly.
4) Hold down the Power button (A) and tap
the Gear button (B) once. The remote will
display "Pairing .. :'
5) Once paired, the display will show the
main screen with the speedometer, remote
battery level, and board battery level.
06