OUTSIDE
INSIDE
Doo
r glazing
Remember glass is fragile, handle with care using gloves. Stick double-sided adhesive foam strip (
990
) to both vertical door bars
as in II, making sure the aluminium surface is clean and dry.
Place the bottom pane of glass in position, making sure it is absolutely central.
Peel off the backing tape from foam strip up the vertical door bar only as far as the height of the pane of glass. Making sure glass
is square, push onto foam strip.
Then repeat for the top pane, noting that the top pane is shorter.
Wheel housing can be eased up to allow the glass to fit.
Clip door glazing cap (
991
) into both vertical door bars as in II.
With the door flat on the ground or on a bench, starting at the bottom, push down fairly hard with the heel of your hand
working your way to the top, virtually flattening the capping (
991
) it will clip
into both vertical door bars as in
II
.
Cut the top off level with the top of the glass with a hack saw. Then re-fit the door wheel housing.
Slide door seal (
984
) into both
vertical door bars as in
II
and crimp bottom end of door bars with pliers to prevent seal sliding down.
16
INSID
E
TOUGHENED
GLAZING
610 x
765
610 x 920
Summary of Contents for SILVERLINE 106 LEAN TO
