HOW TO USE
Installing the Wine Racks
•
Any of the Wine Racks can be removed to accommodate larger bottles.
•
To remove a Wine Rack, remove all of the bottles. Lift the Wine Rack
upward and then gently pull out.
To replace a Wine Rack, slide the Wine Rack back onto the Wine Rack Supporting
Guides and push back until the wine rack tabs slide into place on the Wine
Rack Guides.
NOTE:
Ensure that the tabs are firmly in place before placing any
bottles on the Wine Rack.
Locking and Unlocking the Control Panel
You can manually lock the control panel by pressing the Control Panel Lock keypad.
NOTE:
If a Keypad is not pressed within 1 minute then the Control Panel will lock
automatically. To unlock press the Control Panel Lock keypad for approximately
3 seconds until the Lock Indicator Light goes out.
Setting the Temperature
NOTE:
The Temperature display can be changed between Celsius and Fahrenheit
by pressing and holding the left side Raise and Lower Temperatures Buttons
simultaneously for approximately 3 seconds.
1. The temperatures in the Upper Zone and Lower Zone can be independently
controlled and displayed. The temperature range in each zone is between
4º - 16ºC (39º - 61ºF).
2. The Temperature Display indicates the current internal temperature of each
zone. When setting the temperature the Temperature Display will flash to
indicating that the temperature setting is in progress.
3. To set the temperature in the Upper Zone, press the controls on the left side.
To set the temperature in the Lower zone, press the controls on the right side.
4. When pressing the Raise or Lower Temperature Keypads the setting will
increase or decrease in increments of 1°. NOTE: The Temperature display will
flash until no Keypad is pressed for approximately 3 seconds. Your last setting
is recorded and confirmed by the display indicating the current temperature
of that zone.
6
Booklet Salton BuiltInWC-2039_EN_REV 1.qxd 9/5/07 9:47 AM Page 6
