Hall Technologies December 29, 2022
Page 9 of 18
EX-LYNX-WP-TX PANEL
No.
Name
Description
1
HDMI IN
HDMI input
2
DC 12V
DC 12V/1A power supply connection for local power
NOTE:
Only one side (transmitter or receiver) needs to be powered locally
–
the EX-
LYNX-RX is typically locally powered and includes the needed power supply.
3
RS-232
RS232 port on a phoenix connector for control pass-through
4
IR OUT
IR emitter port output (received from the EX-LYNX-RX IR input)
5
IR IN
IR emitter port input (sent to the EX-LYNX-RX IR output)
6
CAT OUT
RJ45 output port for connection to the RJ45 input port on a cascading EX-LYNX-RX
(up to 8 can be cascaded)
7
UPDATE
Used to update the firmware.
8
EDID
Sets EDID information (see dipswitch settings in the connections diagram).
