Hall Technologies August 22, 2022
Page 21 of 30
UI Element
Description
When an access code is configured, it appears on the upper right corner of the
display.
If you don’t want to set access code, you can enter nothing here.
By default, it’s set as blank.
Auto
When “Auto” is checked, the device randomly generates a four-digit access code in
the following cases:
The device switches to Guide Screen.
The device reboots.
Apply
Click to perform settings.
CEC
UI Element
Description
CEC
Set display on or off through CEC commands.
Power On
Click to power on the connected display through CEC command.
Power Off
Click to power off the connected display through CEC command.
CEC Edit
Configure CEC Display On and Off commands for passing through them to HDMI
Out and/or HDBT Out port.
Command Testing
Enter the CEC command of a controlled display device for click “Send” to test if it
is available before you enter it in
Display On
and
Display Off
.
Display On
Enter the CEC Display On command of a controlled display device and click “Save”.
For more information about the command, see the user guide of your display
devices.
By default, it’s set as blank.
Display Off
Enter the CEC Display Off command of a controlled display device and click
“Save”. For more information about the command, see the user guide of your
display devices.
By default, it’s set as blank.
