Hall Technologies December 29, 2022
Page 7 of 18
Connectors & Indicators
EX-LYNX-TX PANEL
No.
Name
Description
1
HDMI IN
HDMI input
2
LOOP OUT
HDMI loop output for local monitor
3
CAT OUT
RJ45 output port for connection to the RJ45 input port on the EX-LYNX-RX
4
TOSLINK OUT
Fiber optic output with de-embedded audio
5
L/R OUT
3.5mm stereo output with de-embedded audio
6
IR IN
IR emitter port input (sent to the EX-LYNX-RX IR output)
7
IR OUT
IR emitter port output (received from the EX-LYNX-RX IR input)
8
RS-232
RS232 port on a phoenix connector for control pass-through
9
DC 12V
DC 12V/1A power supply connection for local power
NOTE:
Only one side (transmitter or receiver) needs to be powered locally
–
the EX-
LYNX-RX is typically locally powered and includes the needed power supply.
10
PWR
LED will illuminate when device is powered up
11
LINK
LED will illuminate when the link to the EX-LYNX-RX is connected
12
EDID
Sets EDID information (see dipswitch settings in the connections diagram).
13
SERVICE
Used to update the firmware.
1
2
3
4
5
6
7
8
9
12
13
10
11