8
2
5
1
7
1
4
3
6
11
9
10
1
TIGHTEN NUT (TB-SS4-09) TO THE SHOULDER
THIS DISTANCE SHOULD BE 8 34 "
OR LESS WHEN THE NUT IS PROPERLY TIGHTENED
NOTES:
USE ANTI-SEIZE ON ALL THREADED HARDWARE.
1.
SAFE-T WIRE AND WASHER NOT SHOWN
2.
REVISIONS
REV
DESCRIPTION
DATE
BY CHK
1
ADDITION OF SAFE-T WIRE TO BOM
11/15/2019 DHW MRE
ITEM QTY PART NUMBER
DESCRIPTION
1
2
TB-SS5-02
STOP
2
1
TB-SS5-04
END GUIDE
3
1
TB-SS4-05
TUBING
4
1
TB-SS5-06
END GUIDE NO HOLE
5
1
TB-SS4-07
DOWEL PIN 1/4" DIA. x 2" LONG SS
6
1
TB-SS4-09
NUT
7
1
TB-SS5-10
CUSHION 5"
8
1
TB-SS4-11
EYE & SHAFT
9
16
TB-8898-17
DRILLED HEAD BOLT
10
16
TB-8898-17-LW
LOCK WASHER
11
1
TB-8849-6
COTTER PIN
12
4
TB-8898-18-A
SAFE-T WIRE
13
4
TB-8898-18-W
SAFE-T WIRE WASHER
DATE
TB-SS5 SOFT START 5IN TUBE
DRAWN
DATE
514 Mecklem Ln Ellwood City, PA 16117
4/25/2013
TOLERANCES
ANGLE .XX .XXX
± 0.5° ± .01 ± .005
SOFT START 5 INCH
BJE
©
2019 HALL TECHNICAL SERVICES, LLC ALL RIGHTS RESERVED.
SOLIDWORKS
PROJECT
FILE NAME
DESCRIPTION
TB-SS5
A
REV
HALL TECHNICAL SERVICES LLC
1
5" TOWBAR (7378)
HALL TECHNICAL SERVICES LLC PROPRIETARY RIGHTS ARE INCLUDED IN THE INFORMATION DISCLOSED HEREIN. RECIPIENT, BY ACCEPTING THIS DOCUMENT, AGREES THAT
NEITHER THIS DOCUMENT NOR THE INFORMATION DISCLOSED HEREIN NOR ANY PART THEREOF SHALL BE REPRODUCED OR TRANSFERRED TO OTHER DOCUMENTS OR USED OR
DISCLOSED TO OTHERS FOR MANUFACTURING OR FOR ANY OTHER PURPOSE EXCEPT AS SPECIFICALLY AUTHORIZED IN WRITING BY HALL TECHNICAL SERVICES LLC.
SCALE 1:5 WEIGHT: 46.16 LBS
2/12/2018
VTM
SHEET 1 OF 1
BLAST & PAINT SPECIFICATION:
1. COMMERCIAL BLAST SSPC-SP6
.
2. SPRAY ONE COAT BEIGE EPOXY PRIMER PPG EPX-900 (EPX-901 CATALYST)
OR EQUIVALENT.
3. SPRAY TWO COATS SAFETY
RED AUE-100 ACRYLIC URETHANE ENAMEL (AUE-101 CATALYST)
OR EQUIVALENT.
POWDERCOAT CALLOUT:
POWDERCOAT color PER AAMA 2604-98, 1.2 MIL MIN. (FLORIDA 5 YEAR)
1.
POWDERCOAT color PER AAMA 2605-98 1.2 MIL MIN. (FLORIDA 10 YEAR)
1.
POWDERCOAT color PER MIL-C-24712A TYPE XX CLASS 2, 2 MIL MIN.
(INDOOR WET APPLICATIONS)
1.
POWDERCOAT color PER MIL-C-24712A TYPE XX CLASS 3, 4 MIL MIN.
(OUTDOOR APPLICATIONS)
1.
TYPES
TYPE 1: EPOXY
1.
TYPE II: EPOXY POLYESTER HYBRID
2.
TYPE III: POLYESTER
3.
TYPE IV: POLYESTER TRIGLYCEDIAL ISOCYANURATE (TGIC)
4.
TYPE V: POLYESTER URETHANE HYBRID
5.
TYPE VI: ACRYLIC
6.
TYPE VII: ACRYLIC POLYESTER HYBRID
7.
TYPE VIII: ACRYLIC URETHANE HYBRID
8.
TYPE IX: URETHANE
9.
TYPE X: POLYURETHANE
10.
TYPE XI: VINYL
11.
TYPE XII: NYLON
12.
GALVANIZING CALLOUT:
HOT DIP GALVANIZE IN ACCORDANCE WITH ASTM A123
1.
ZINC PLATING
SC2 SERVICE CONDITION MODERATE
PLATE YELLOW ZINC DICHROMATE PER ASTM B-633, TYPE II, Fe/Zn 8, 0.0003"
1.
PLATE CLEAR ZINC CHROMATE PER ASTM B-633, TYPE III, Fe/Zn 8, 0.0003"
1.
SC3 SERVICE CONDITION SEVERE
PLATE YELLOW ZINC DICHROMATE PER ASTM B-633, TYPE II, Fe/Zn 12, 0.0005"
1.
PLATE CLEAR ZINC CHROMATE PER ASTM B-633, TYPE III, Fe/Zn 12, 0.0005"
1.
SC4 SERVICE CONDITION VERY SEVERE (SALT EXPOSURE)
PLATE YELLOW ZINC DICHROMATE PER ASTM B-633, TYPE II, Fe/Zn 24, 0.001"
1.
BAKE AFTER PLATING IF MATERIAL IS HIGH STRENGTH (HARDNESS > 35 Rc) 4 HRS @ 191-205 C (ASTM B 242)
2.
ANODIZING CALLOUTS (ALUMINUM)
"REGULAR CLEAR ANODIZING"
CLEAR ANODIZE PER MIL-A-8625 TYPE II, CLASS 1, 0.8 MIL MIN. THICKNESS
1.
"REGULAR COLORED ANODIZING"
ANODIZE PER MIL-A-8625 TYPE II, CLASS 2, 0.8 MIL MIN. THICKNESS, COLOR XXXX
1.
"HARDCOAT CLEAR ANODIZING"
CLEAR HARDCOAT ANODIZE PER MIL-A-8625 TYPE III, CLASS 1, 2.0 MIL MIN. THICKNESS
1.
"HARDCOAT COLORED ANODIZING"
HARDCOAT ANODIZE PER MIL-A-8625 TYPE II, CLASS 2, 2.0 MIL MIN. THICKNESS, COLOR XXXX
1.
PASSIVATION (STAINLESS STEELS)
PASSIVATE PER ASTM A967
1.
PASSIVATE VIA ELECTROPOLISH PER ASTM B912
2.
CHROME PLATE (FERROUS METALS)
CHROME PLATE PER QQ-C-320 TYPE?? CLASS??
1.
BLACK OXIDE (FERROUS METALS)
BLACK OXIDE PER MIL-C-13924 CLASS ??
1.
********************************************************
THESE ITEMS ARE FILLED IN BY THE DRAWING/SHEET PROPERTIES
FILE NAME
NEXT ASSY
PROJ. ID (PROJECT ID - WORK ORDER, PART NUMBER, ASSIGNED)
CHECKER & DATE
DRAFTER & DATE
REV
REVISIONS:
USE A-Z FOR CONCEPT/PRE-RELEASE DRAWINGS
USE 0-99 FOR RELEASED/PRODUCTION DRAWINGS
THESE ITEMS ARE FILLED IN BY THE PART PROPERTIES
PROJECT
DESCRIPTION
DWG/PART NO.
WEIGHT
FILE NAME IS THE DRAWING FILE NAME
To Adjust display units on weight, open part/assembly, document
properties, units and change mass units to number of decimal points.
LAST SAVED: 11/15/2019 PRINTED:
11/15/2019
UNLESS OTHERWISE SPECIFIED
DIMENSIONS ARE IN INCHES
CHECK
DWG/PART NO.
SIZE
X<12"=± 1/32" X>12"=±1/16"
FOLDER - 737X
