Hall Research Technologies UHB-R, User Manual

Page: 5 / 12

HDMI/VGA Auto-Switching Wall Plate with USB
© Copyright 2019 Hall Research, LLC. 5
3.0 Setup
Installation

Connect the video source(s) to the UHB-SW2-WP transmitter.

Connect the USB Host (PC) to the transmitter using a USB A/B cable.

Connect the display to the UHB-R receiver.
 Connect the USB devices to the receiver.
 Optionally, connect the RS-232 or IR detector/emitter pair to extend
control signals between transmitter and receiver.

Connect CAT6 or better cable between transmitter and receiver.

Plug in the supplied power supply to the receiver. The transmitter will
receive its power through the CAT6 cable.
NOTE Do not exceed 40m/131’ if the extender is to be used with
4K UHD. Otherwise, do not exceed 70m/230’ total length,
including patch cables. If using shielded cable, ensure
shields are connected to shielded connectors at both ends.