9
UH2X-P1
4.7 IR Remote Extension
The UH2X-P1 allows connection of an IR detector and an IR emitter cable to each
end. This provides the ability to extend IR signals in either direction. For example,
when an IR detector is connected to the remote Receiver and IR emitter is connected
to the sender, the user from the remote TV end can control the source using an IR
remote.
One IR detector cable is provided with the extender kit per Section 2.1. Replacement
cable: Hall Research P/N CIR-DET-P2
Tip = Data | Ring = +5V | Sleeve = Gnd
Note: This is a representative image, The actual cable
may look slightly different
Do not substitute any other emitter or detector cable as this may not work, the
extenders as well as your substitute IR cable may also get damaged.
One IR emitter cable is provided with the extender kit per Section 2.1. Replacement:
Hall Research P/N CIR-EMT (CIR-EMT2 can also be used if a cover is needed).
Tip = Anode (+) | Ring = Cathode (-) | Sleeve =NC
Note: This is a representative image, The actual cable
may look slightly different
Please check Hall Research website for further information.
