4 or 8 Channel Splitter PC Video & Power over Twisted-Pair Sender
3
1. Introduction
1.1 General
This User Manual applies to model number UV4-S and UV8-S Mini-Cat ® series of
high resolution PC or HDTV component video system.
A unique feature of the system is that in most installations only one power supply is
enough to power the sender and the receiver(s).
These devices are four (4) or eight (8) Channel Splitters for PC Video & power over
Twisted-Pair senders
In a typical application, they are located at the video & power source and connected
to one or more compatible receiver units.
Low-skew UTP cable (such as Hall Research’s Zero-skew™ CAT5 cable) is
recommended with the Model UV1-R particularly if cable lengths are 200 feet or
longer.
1.2 Features
•
Support for local monitor at transmitter
•
Multiple CATx outputs
•
Transmits video and phantom power on a single CATx cable
•
Compact & rugged metal enclosure
•
Eliminates the need for bulky, expensive and hard to build multi-coaxial
cables for high-resolution video extension
•
Amplifies the signal for clean and crisp transmission
•
Differential signaling eliminates ground loops and noise
•
Handles resolutions up to 1920x1440 at 60Hz
•
Rugged, Reliable, Compact size
•
Drive standard Cat5 cables to 500 feet for (VGA and Component Video)
Figure 1 – UV4-S & UV8-S Application Diagram
