8-Port KVM Switch Console with 4K HDMI LCD & USB 2.0
5
3.2 Mount in 4-post Rack
The Console must to be supported on all its four corners. Do not install the
rack using its front panel only. For installation in a two-post system, a
special kit is required.
1.
Mount both brackets (separated from the console) to the inside
rear of a standard 1U rack system using user-supplied screws.
2.
Take the console and gently slide it into the two rear-mounted
brackets in the rack and secure the console in place by inserting
user-supplied screws.
4.0 Setup and Operation
The figures below show the front and rear of the KVM Switch Console.
Cables are not included. For each input, you must provide one HDMI and
one USB cable.
