Model HR-4P
14
•
The
Upload
button is used to store this information in the HR-4P unit.
Figure 13 – I/O Control
3.17 IR
•
The
IR
tab is used to configure the IR capabilities of the HR-4P unit. A
compatible IR Detector and Emitter are required to fully utilize the IR features.
•
When the IR is configured as an
Input
, the HR-4P unit can learn any supported
IR codes from the user’s remote control. These IR codes can be stored into 1
of 32 IR Memory locations in the unit.
•
IR codes stored in memory can an 8 character name associated with it, making
it easier to be identified later.
o
Check the
IR Enabled
box
o
To LEARN IR Codes
Select the
Input
radio button and click
Upload
Install IR Detector on HR-4P Unit
Click the
LEARN
button
Press IR Remote Control button while pointing at IR Detector
Store code learned into IR Memory Location with name if desired
o
To SEND IR Codes
Select the Output radio button and click Upload
Install IR Emitter
Recall IR memory location
Click the SEND button to play the remote code from the HR-4P unit
