EX-4KU
8
© Copyright 2020 Hall Research, LLC.
Model UHB-R FRONT
1)
POWER: LED indicates the receiver is powered.
2)
SERVICE: Micro USB connection for updating firmware. Firmware
update decided by position of DIP switch on bottom of receiver. Set DIP
switch to “0” for normal operation.
Model UHB-R REAR
1)
DC 24V: Power input. Use the included power supply with the locking
connector. The transmitter receives power via PoC from the receiver.
2)
HDBaseT IN: Connect to EX-4KU-WP using CAT6 cable.
3)
IR IN / IR OUT: Not supported with EX-4KU-WP transmitter.
4)
HDMI OUT: Connect to HDMI display, such as a TV or projector.
5)
USB: Connect to USB devices, such as keyboards, mice, or touchscreens.
6)
RS-232: Use the supplied terminal block to extend RS-232 between the
transmitter and receiver.
