These pumps are designed as submersible pumps and have been provided with overload
protection for use in garden ponds, fountains, terraced fountains, indoor fountains to
circulate and oxygenate clear water. You can use the suction cups or four screws to fix it. If
it is fixed to any appropriate bases, make sure that the appliance is securely installed
before operating it.
Facts
•
High performance asynchronous motor with new design
•
Energy saving up to 50% more than other pumps.
•
High pump heads and larger flow.
•
Can pump dirt particles of size up to ¼”
•
Wear proof ceramic shaft which can be used for a longer period of time.
Used as submersible pumps (see fig.1)
IMPORTANT
: Do not let the pump run dry – this could cause damage to the motor.
•
Submerse the pumps completely in your skimmer so as to make the pump body fill with
water.
•
A water level of approx. 6 in. is required for submersible use in order to prevent the
pump from taking in air. (See fig.1)
•
To prevent the screen becoming prematurely clogged, place the pump above the mud
in the pond!
•
The pump is designed to accommodate 2” external threads through the socket
(fountain jets, nozzles, water height regulators, standpipes, etc.).
•
Running in conjunction with fountain jets, the pump should be stationed firmly and
horizontally (on a brick).
•
The pump can be switched on by simply plugging it in and switched off by plugging off.
•
The water temperature should not exceed 35
℃
(95
℉
) and do not let the pump freeze
in the wintertime.
Overload protection
The pump has a built-in thermal overload trip which prevents the pump from overheating.
The pump must be allowed to cool down before restarting.
