Page 26
If enabled by the owner, the taximeter also registers passi-
ve breaks. If this function is enabled, the message
PrES
bUtton
appears each time in FOR HIRE mode 1 minute
before reaching the time that has been set by the owner.
After 1 minute (without cancellation by driver) the passive
break starts.
Passive Break
Passive Break
The driver can exit the warning display of the passive break
(
PrES bUtton
) by pressing the buttons
MNOP
.
The passive break (
P.PAUSE
) can be ended at any time by
pressing the buttons
MNO
. The passive break is always
exited automatically, if the vehicle drives (from approx.
3km/h).
Depending on the owner settings the roof sign can be switched on or off during the break. The taxime-
ter status for data radio can also be active or not active depending on the owner settings.
`
While
P.PAUSE
is displayed, press button
P
to move to
the display of the total break time of the current shift.
Summary of Contents for MM-03
Page 1: ......
