Halcyon Explorer User Manual Download Page 5

5

Delrin canisters to complete your video, film or photographic package.

Explorer, Proteus and Apollo light canisters are designed to be mounted 
on a diver's waist belt, while the hands-free Goodman-style light head 
allows you maximum dexterity during the dive. Manufactured from a 
single piece of black Delrin, the tough Goodman-style head allows for 
hands-free operation while sitting cleanly on top of the diver's hand. The 
fully adjustable handle is hard-coated aluminum and can be ordered with 
an optional reserve knife attached. 

Lighting Systems Features

Explorer

•True sealed Delrin lid design; completely isolates battery compart-

ment from cord and light head

•Battery and lid connect with corrosion-resistant, solid-core gold-plat-

ed plugs; plugs are O-ring sealed to ensure leakproof lid

•New secure battery tray with stainless steel rods for additional pro-

tection

•Unique captured silicon switch boot integrated into new ergonomic 

Delrin switch protector

•"Halcyon Blue" lid O-ring and switch boot
•Solid Delrin canisters are longer to ease the stowing of the long pri-

mary hose; water-trap in bottom of canister and raised battery tray 
provide additional protection for the battery

•NiMH battery technology
•New dual-voltage 4amp charger with built-in cooling fan
•Many new features of the Explorer series are patent-pending

Proteus

•Traditional sealed lead acid batteries
•One-piece canister maintains maximum reliability
•110 or 220 volt charger

Apollo

•All of the features of our Explorer Systems
•HMI and HID light heads specifically crafted for 

video, film and photographic applications

All Halcyon Lights come standard with the 
following:

•Locking latches   
•Stainless Steel fittings 

Summary of Contents for Explorer





























Reviews: