54
Maintenance and servicing
Replacing the V-belt for sweeping
roller
- Turn off the engine and remove the
key
- Hold the machine with the parking
brake
- Remove the cover at the bottom right
(turn the locks anticlockwise with a
square key)
- Release the tension spring
(Fig. 26/10) with your left hand and
use your right hand to remove the
V-belt from the tensioning roller
- Remove the V-belt (Fig. 26/12)
Assemble in reverse order.
Replacing the V-belt for the side
brush
- Turn off the engine and remove the
key
- Hold the machine with the parking
brake
- Remove the cover at the bottom right
(turn the locks anticlockwise with a
square key)
- Remove the V-belt for the sweeping
roller (as described in
Section “Replacing the V-belt for
- Undo and remove the bolts
(Fig. 26/16) on the sheet metal cover
- Remove the sheet metal cover
- Press the side brush from the front
towards the device, the V-belt
(Fig. 26/14) is slackened
- Remove the V-belt (Fig. 26/14)
Assembly is in reverse order.
Replacing the V-belt for the suction
fan
- Turn off the engine and remove the
key
- Hold the machine with the parking
brake
- Open the seat hood
- Undo the hexagon nuts (Fig. 26/15)
and remove them along with the belt
guide (Fig. 26/5)
- Slacken the V-belt (Fig. 26/6) using
the tensioning roller lever (Fig. 26/17)
and remove it from the V-belt pulley
- Undo the tensioning roller (Fig. 26/2),
slacken the V-belt (Fig. 26/1) and
then remove it
Assemble in reverse order.