44
05-7175-00-00.fm
Maintenance and Servicing
5 Maintenance and Servicing
General
The operator is instructed fully on delivery of the machine.
Compliance with the maintenance work recommended by us gives you the
certainty of always having an operational machine available.
Daily and weekly maintenance and repair work can be undertaken by a driver
trained for this, all further Hako system maintenance work may be undertaken
only by trained and qualified personnel.
Please contact your nearest Hako service centre or authorised Hako dealer.
Any warranty claim is null and void if this is not complied with and damage
results.
Please always state the serial number in all enquiries and spare parts orders,
see section 1.7 – type plate.
Hako system maintenance
The Hako system maintenance specifies in single modules the special techni-
cal work to be done and the periods of time for the maintenance activities.
Parts to be replaced for the individual maintenance tasks are determined.
Hako system maintenance:
• Assures the reliable readiness for use of the Hako working machines
(preventive maintenance).
• Minimises operating costs, repair costs, costs for maintenance.
• Assures long life and readiness for use of the machine.
Attention
Before undertaking servicing and maintenance work, read and
observe the safety instructions in chapter 1 of this operating manual!
Note
The machine‘s parts to be serviced are marked with a yellow dot and
yellow areas.
