HAKO Scrubmaster B 115 R, Service Booklet

Page: 100 / 133

Foil 100
10.1 Service-Intervall – 3.3.1.1
On from Software release 1.002 the service intervall is enabled ex factory in the
Scrubmaster B115R. The service intervall is activated after 250 working hours of the
machine, or after 365 days; depending on wich event occurs first.
This isn´t an error code; This is an operator information that indicates a necessary
service to the machine. This operator information doesn´t impair the function of the
machine. This information is displayed for 5 sec, everytime the machine is switched
on; then the machine can be used as usual.
You can skip this information by activation of any function (drive, scrubbing, suction or
suction and scrubbing).
Activation or deactivation and reset of the service interval is possible only with the
Hako-Diagnosis System.
This requests the same preconditions like the flashing of a new control unit:
• Service-Computer with up to date Hako-Diagnosis-Software (and COM-Port)
• Interface PN 03501750 or PN 03502430
• Diagnostic Cable PN 03502110