Page 8
Operating Instructions
1. Lift the cover tank off of the of solution tank by releasing the two latches.
2. Add up to 1-1/2 gallons of disinfectant solution to the solution tank. Use only commercially available
cleaning chemicals.
3. Place the cover tank back on solution tank and fasten the two latches.
4. Plug power cord into grounded wall outlet.
5. Connect the vac/solution hose assembly to machine.
6. Turn on machine via the rocker switch on the back of the machine. Purge air from the lines by operating
the wand in an upward angle for a few seconds.
7. Machine will run as necessary to keep the pressure and can be used without power for a certain amount
of time as long as there is pressure built up in the system.
8. Warning: Do not overfi ll. Shutdown machine by switching the rocker switch to the off position and un-
plugging from the power source. De-pressurize the system by holding the spray wand in the on position
until no more solution is sprayed while the machine is not powered.
Summary of Contents for Minuteman DS2
