Example:
700 to 840
°
F
1. Insert the control card into the slot in the
front of the unit.
• The
hundreds
digit will begin to flash,
indicating that the unit is in the TEM-
PERATURE SET mode and data may be
entered.
2. Entering the
hundreds
digit
• Press the
or
button to set the
desired value. Only 4, 5, 6, 7, or 8 can be
selected. (In
°
C mode, 2, 3, or 4 can be
selected.)
When the desired value is displayed,
press the
button to enter. The
tens
digit
will begin to flash.
3. Entering the
tens
digit
• Press the
or
button to set the
desired value. Any value from 0 to 9 can
be selected. When the desired value is
displayed, press the
button to enter.
The
units
digit will begin to flash.
4. Entering the
units
digit
• Press the
or
button to set the
desired value. When the desired value is
displayed, press the
button to enter.
The desired temperature is now entered
into the system memory and heater
control will begin.
Each FM-202 comes with a small card, which
inserts into the Card slot on the front of the unit.
This card is used when entering data for the
process control function (a temperature value is
to be changed, or data are to be entered). Any
FM-202 card can be used with any FM-202
soldering station.
●
Control card
NOTE:
If power is switched off or lost during the execution of this
procedure, no data will be entered. The entire procedure
must be repeated from step 1.
CAUTION:
The control card must be inserted into the card slot in the
correct direction for data to be entered.
7
Press the button once.
Insert the card.
Press the or button.
Press the button once.
Press the button once.
Press the or button.
●
Changing the temperature setting