02-147015-00-00.fm
77
Use
2.4.5
Connections for rear attachments
The following devices can be operated with the connections for the rear
attachments
•
A
= X64 socket for additional functions of control cable
•
E
= Supply 19/22/27 l/min (hydraulic circuit II)
•
C
= Supply for lift system hydraulic cylinder
•
C
= Return for lift system hydraulic cylinder
•
E
= Return 19/22/27 l/min (hydraulic circuit II)
•
F
= X65 7-pin socket for lighting
•
C
= X68 7-pin socket for spreader control cable
•
C
= X67 7-pin socket for spreader control cable
Switching on the hydraulic circuit
Select the A menu in the multifunction display with the turn-push knob
. Change the current value in the hydraulic circuit II menu item
. Setting range: ON/OFF
Required for attachments without coding plug! The hydraulic circuit is
switched off if the driver leaves the driver's seat.
Fig. 71:
Note
The hydraulic couplings are marked with coloured rings and
engraving, see example
Fig. 72-C
.
Fig. 72:
B
C
D
E
A
F
G
X
H
Summary of Contents for Citymaster 650
