HAKO Citymaster 2200, Operating Manual

Page: 183 / 238

05-1481-00-00.fm
183
Maintenance and servicing
5.5.3 Side covers
Observe the Safety instructions – Protective devices, see page 180.
Removing the left side cover
1. Place the vehicle on a level surface and hold it with the parking brake.
Switch the engine off and pull out the ignition key. Allow the engine to
cool down.
2. Loosen the six fastening bolts
Fig. 143-B
and remove the side
cover
Fig. 143-A
.
3. If necessary, raise the tipper.
4. Observe the respective safety instructions.
5. Re-install the side cover after completing maintenance and repair work.
Opening the side flap
1. Place the vehicle on a level surface and hold it with the parking brake.
Switch the engine off and pull out the ignition key. Allow the engine to
cool down.
2. The side flap
Fig. 143-C
is fixed with magnets and can be opened by
hand.
3. Observe the respective safety instructions.
4. Close the side flap again after completing maintenance work.
Removing the right side cover
1. Place the vehicle on a level surface and secure it with the parking
brake. Switch the engine off and pull out the ignition key. Allow the
engine to cool down.
2. Loosen the six fastening bolts
Fig. 143-B
and remove the side
cover
Fig. 143-D
.
3. If necessary, raise the tipper.
4. Observe the respective safety instructions.
5. Re-install the side cover after completing maintenance work.
A
C
D B
Fig. 143: